Low Work Height Vertical Injection Molding Machine
Low Work Height Vertical Injection Molding Machine Manufacturer
As a vertical injection molding machine manufacturer, we specialize in equipment for insert molding and overmolding. Production covers machining, fabrication, assembly, commissioning and inspection. The low work height range provides accessible mold positioning for applications that require frequent insert loading and part removal. Fixed, slide and rotary table configurations are available according to mold layout and production requirements. Support covers machine selection, application review, installation guidance, operator training and after-sales service for overseas production projects.
Product Categories
Latest Products
Why Choose Us
Focused Manufacturing
Vertical injection molding equipment is the core manufacturing product range, covering fixed-table, slide-table, rotary-table and vertical clamping–horizontal injection configurations.
Application Review
Machine selection is based on the actual molding application. Product drawings, insert dimensions, mold size, material, cycle requirements and expected output can be reviewed before equipment configuration is confirmed.
Controlled Production
Machining, fabrication, welding, assembly, commissioning and inspection are included in the equipment production process. Mechanical, hydraulic and electrical systems are checked during assembly and commissioning.
Overseas Service
Technical communication continues from machine selection through installation and production start-up. Installation guidance, operator training, commissioning assistance and after-sales technical support are available for overseas projects.
Advantages
Low Working Position
The lower mold position provides practical access for repeated insert placement and molded-part removal. This is particularly useful when operators load terminals, connectors, wires, cables or metal components during each cycle.
Open Mold Access
The vertical clamping arrangement keeps the lower mold accessible during loading and unloading. Operators can position inserts and check their placement before the mold closes.
Flexible Table Layout
Fixed, slide and rotary table arrangements provide different ways to organize mold access and insert handling. The appropriate layout depends on mold size, loading method and production cycle.
Insert Molding Application
The machine range is intended for processes where a pre-positioned component becomes part of the molded product, including electrical connectors, terminals, cable components and metal insert parts.
Machine Configurations
Fixed Table
The fixed table provides a stable mold position for applications with straightforward insert loading and unloading. It suits production where the operator works directly at one molding position.
Slide Table
The sliding table moves the mold toward the loading area, giving the operator clearer access for insert placement and part removal before the mold returns to the injection position.
Rotary Table
The rotary table provides separate working positions for insert loading and molding. It suits applications where preparation at one position can continue while molding takes place at another.
Custom Configuration
Configuration can be reviewed according to mold dimensions, insert geometry, loading method, cycle requirements, automation and available installation space.
Technical Specifications
|
Parameter |
Specification |
|
Machine Type |
Low Work Height Vertical Injection Molding Machine |
|
Clamping Force Range |
120–320 ton models |
|
Table Options |
Fixed / Slide / Rotary |
|
Molding Processes |
Insert Molding / Overmolding |
|
Injection Arrangement |
Vertical Injection |
|
Typical Insert Types |
Metal Inserts / Terminals / Connectors / Wires / Cables |
|
Configuration |
Standard or application-based |
Electrical Components
Connectors, terminals and plugs can be molded around positioned inserts where accurate placement is required before injection.
Cable Overmolding
Wire, cable and terminal components can be positioned in the lower mold before plastic is injected around the selected area.
Automotive Components
The machine can be applied to molded components containing metal or electrical inserts, including connector-related and sensor-related parts.
Industrial Components
Bushings, pins, hardware inserts, grips and similar components can be molded around or onto pre-positioned parts.
Connectors
Electrical connector bodies and related components requiring terminals or other inserts to be held in position during molding.
Terminals
Terminal components that require plastic insulation, protection or structural support through insert molding.
Cable Components
Cable ends, wire assemblies and strain-relief type components requiring controlled positioning before overmolding.
Metal Insert Parts
Bushings, pins, threaded components and stamped metal parts that become integrated with the molded plastic component.
Production Workflow
Insert Preparation
Inserts are checked for size, orientation and position before being placed into the lower mold using the required fixture or loading method.
Mold Closing & Injection
After the insert is positioned, the mold closes and plastic is injected into the cavity around the component.
Cooling & Opening
The molded component remains in the mold during the required cooling stage before the mold opens for removal.
Part Removal & Reloading
The finished part is removed and the next insert is prepared. Slide and rotary configurations can organize these handling steps separately from the injection position
Automation & Production Integration
01
Insert Handling
Manual insert loading can be combined with fixtures, guided loading tools or application-specific handling equipment according to the product and mold design.
02
Part Removal
Assisted or robotic part removal can be considered when repeatable handling is required by the product geometry or production cycle.
03
Rotary Operation
Separate loading and molding positions provide a practical arrangement for applications with frequent insert preparation and repeated production cycles.
04
Line Integration
Automation requirements can be reviewed together with mold design, safety arrangements, handling equipment and available factory space before the machine configuration is finalized.
Machine Selection Guide
Mold Dimensions
Confirm mold length, width, thickness, opening requirements and mounting arrangement. These dimensions determine whether the selected machine provides the required installation space.
01
Insert Requirements
Insert size, weight, orientation and loading frequency affect the working area and table configuration required for the application.
02
Clamping Force
Clamping force should be matched to projected area, mold design, material and molding conditions. Final selection should be based on the actual product and mold data.
03
Production Method
Manual, assisted and automated loading require different working arrangements. Fixed, slide and rotary configurations should be selected according to the required handling sequence.
04
Manufacturing & Quality Control
Machine Manufacturing
Machining, fabrication, welding, assembly, commissioning and inspection form part of the equipment manufacturing process.
Functional Inspection
AMechanical, hydraulic and electrical systems are checked during assembly and commissioning before the machine is prepared for shipment.
Certifications
Applicable equipment is supplied with CE and EMC certification according to the relevant machine and market requirements.
Installation Guidance
Installation requirements and preparation information are provided before equipment delivery, with installation and commissioning guidance available for overseas projects.
Operator Training
Training covers machine operation, production start-up procedures and routine operating requirements for production personnel.
Warranty & Technical Support
Machines are covered by a 12-month warranty. Technical assistance, troubleshooting guidance and spare-parts support are available during the service period.
Production Start-Up
Technical information, machine documentation and commissioning requirements are coordinated to support the transition from equipment installation to production.
Packaging & Transportation
Export Packing
Machines are prepared according to equipment structure, transportation method and destination requirements before shipment.
Component Protection
Mechanical and electrical components are secured and protected during packing to support handling, loading and transportation.
Shipment Coordination
Packing information, shipping arrangements and required export documents are coordinated before dispatch.
FAQ
Request a Low Work Height Machine Solution
Send your product drawing, insert details, mold dimensions, material and target output. The suitable machine configuration and clamping force can then be reviewed against your production requirements.
We are one of the most professional low work height vertical injection molding machine manufacturers and suppliers in China. We warmly welcome you to buy customized low work height vertical injection molding machine at competitive price from our factory. If you have any enquiry about pricelist and quotation, please feel free to email us.
overmoulding machine